Tub-to-Shower Conversion in Bethesda, MD
We remove the old tub down to the studs, reset the drain, and install a low-threshold, grout-free acrylic walk-in shower.
Tub-to-Shower Conversion for Bethesda Homes
In the close-in Bethesda neighborhoods — Edgemoor, Bradley Hills, the Bethesda-Chevy Chase blocks — the tub coming out is almost always cast iron, set into a small tiled alcove in a house built between the 1920s and the 1950s. The enamel is worn, the alcove has been recaulked for decades, and the tub wall has become a step-over concern for owners who want to stay in a neighborhood they can walk.
We break the cast-iron tub down in place and carry it out in sections so nothing is dragged across a finished floor, then open the wall to check the framing, subfloor and original supply lines. In these older Bethesda homes the supply lines are often worth updating while the wall is open. Then a custom-measured grout-free acrylic base and surround with a low threshold, fitted to the existing alcove.
Bethesda clients expect the new shower to match the rest of the bathroom, not stand out. We coordinate the acrylic panel pattern with the existing floor and vanity, choose a glass and hardware finish to suit, and keep the proportions right for a period house. The result should look like it was always there.
Your free in-home consultation includes exact digital measurements, a 3D preview, finish and hardware options, and a price locked in for 12 months. Bethesda is one of the eastern Montgomery County areas we serve from Howard County.
What We See in Bethesda Bathrooms
Bethesda runs from 1920s–1950s brick colonials and Capes close to downtown and in Edgemoor to large 1960s–80s houses and newer rebuilds farther out toward Kenwood and Burning Tree. The older close-in homes usually have original cast-iron tubs in small tiled bathrooms.
What It Costs in Bethesda
We don’t quote a price over the phone — every bathroom is different. You get an exact, locked-in figure at the free in-home consultation, valid for 12 months, with 0% interest financing options and no hidden fees.
How the Project Goes
1. Free in-home consultation
Exact digital measurements, a 3D design preview, and a locked-in quote valid for 12 months.
2. Custom-fitted components
Your acrylic base and surround are measured and pre-fitted to your bathroom before installation day.
3. Professional installation
A factory-trained local crew removes the old fixture, updates plumbing as needed, installs the new system and cleans up.
Permits in Montgomery County
Montgomery County requires a plumbing permit for a tub-to-shower conversion. We obtain it through the Montgomery County Department of Permitting Services and schedule the inspection — handled under the required licenses.
Tub-to-Shower Conversion in Bethesda — FAQs
Can you remove a cast-iron tub from an older Edgemoor or Bradley Hills home?
Yes. We break cast-iron tubs down in place and carry them out in sections rather than dragging them through finished hallways, then check the framing, subfloor and original supply lines before the new base goes in.
Will the new shower match our existing Bethesda bathroom?
That's part of the design conversation at the consultation. The acrylic panels come in tile- and stone-look patterns; we coordinate them with your floor and vanity and choose glass and hardware to match, so the shower reads as original to the room.
Should we update the old pipes during the conversion?
Often, yes. In pre-1960 Bethesda homes the supply lines are frequently near the end of their life, and replacing the exposed section while the wall is already open is far cheaper than a separate job later. We'll show you their condition when the tub is out.
Free In-Home Consultation
Step 1 of 3