Bathtub Replacement in Annapolis, MD
We swap a cracked or dated tub for a high-durability, non-porous acrylic bathtub fitted to your alcove.
Bathtub Replacement for Annapolis Homes
In Annapolis, keeping a tub often matters for resale — near the water, a house with no bathtub is a harder sell. But the tubs in the older Eastport and downtown homes are usually cast iron with the enamel chipped and rust at the overflow, and the humidity has worked the caulk and grout loose at every seam.
We remove the old tub — cast iron comes out in sections so nothing is dragged through the house — check the framing and the original supply lines, and install a new non-porous acrylic tub sized to the alcove, with a seamless grout-free surround. Because acrylic and the surround panels have no pores and no grout lines, the salt air has nothing to get into, so the tub-to-wall joint stays sealed.
In the newer Parole and Annapolis Roads homes it's a simpler swap of a builder tub. Either way, your free in-home consultation includes exact measurements, a 3D preview and a price locked in for 12 months. Our crews travel to Annapolis from Howard County.
What We See in Annapolis Bathrooms
Annapolis ranges from 18th- and 19th-century homes downtown to mid-century houses in Eastport and Hillsmere and newer construction around Parole. Waterfront humidity is hard on tile and grout, so mold-resistant surfaces matter here.
What It Costs in Annapolis
We don’t quote a price over the phone — every bathroom is different. You get an exact, locked-in figure at the free in-home consultation, valid for 12 months, with 0% interest financing options and no hidden fees.
How the Project Goes
1. Free in-home consultation
Exact digital measurements, a 3D design preview, and a locked-in quote valid for 12 months.
2. Custom-fitted components
Your acrylic base and surround are measured and pre-fitted to your bathroom before installation day.
3. Professional installation
A factory-trained local crew removes the old fixture, updates plumbing as needed, installs the new system and cleans up.
Permits in Anne Arundel County
Anne Arundel County requires a plumbing permit for the drain and valve work in a tub-to-shower conversion. We handle the permit and inspection through the county Permit Center under our Maryland MHIC license.
Bathtub Replacement in Annapolis — FAQs
Will a new acrylic tub and surround hold up to the Annapolis humidity?
Better than what you have. Acrylic is non-porous and the surround has no grout lines, so damp, salty air can’t get into the surface or the seams the way it does with tile and a steel tub.
Can you remove a cast-iron tub from an older Eastport home?
Yes. We break cast-iron tubs down in place and carry them out in sections, then inspect the framing and supply lines before the new tub goes in.
We want to keep a tub for resale — is a straight replacement enough?
For most Annapolis homes, yes. A clean, modern acrylic tub with a fresh grout-free surround shows well and keeps the bathroom as a full bath, which is what buyers near the water look for.
Free In-Home Consultation
Step 1 of 3